FAQ about UVA Light Meter
The LS125 UV light meter consists of two parts, the reading display and the light source detector, and is mainly used for the measurement of ultraviolet radiation intensity. Sterilization and disinfection in daily life, industrial curing, integrated circuit lithography, etc. are inseparable from the use of ultraviolet light. The LS125 UVA light meter can measure different wavelengths of UV light by selecting different probes.
The LS125 UVA light Meter is equipped with five types of probes for testing UVA bands. Many customers are not sure how to choose the right probe. Below we will briefly introduce the main features of several probes.
1.UVA
Suitable for intensity and energy measurement of high pressure mercury lamp in UV curing industry, the spectral response is 315-400nm, the test hole diameter is 10mm.
2.UVA-X1
Suitable for general UVA intensity and energy measurement, the spectral response is 260-400nm, the test hole diameter is 10mm.
3.UVALED
Suitable for intensity and energy measurement of area light source of UV LED in UV curing industry, the spectral response is 340-420nm, the test hole diameter is 10mm.
Suitable for intensity and energy measurement of spot light source of UV LED in UV curing industry, the spectral response is 340-420nm, the test hole diameter is 1mm.
Suitable for general UVA+UVV LED intensity and energy measurement, low power measuring range, the spectral response is 340-420nm, the test hole diameter is 10mm.
After reading the above introduction, if you are still confused about the selection of the instrument, please refer to the "LS125 UV Light Meter". Or email us and our email is sales21@linshangtech.com.