Saled Again! Vacuum Coating Thickness Measuring System

Linshang non-contact vacuum coating thickness measuring system, as a device that can inspect the thickness uniformity of film online, is widely used in vacuum coating industry. Recently, another non-contact vacuum coating thickness measuring system was successfully completed and sent to Xiamen Yutong Optoelectronics Co., Ltd.
       Xiamen Yutong Optoelectronics has been focusing on the vacuum coating industry since 2005. Products include ITO conductive film, ITO conductive glass, PMMA, PC, PET and other sheet coatings. The Linshang non-contact vacuum coating thickness measuring system ordered this time can be customized. The following is a real shot of a non-contact vacuum coating thickness measuring system.

From the picture, this is a 3-point non-contact vacuum coating thickness measuring system. But in fact, only one set of test points is installed in the internal structure. This is also a place where Linshang non-contact vacuum coating thickness measuring system can be customized flexibly. When some users order the product for the first time, they may be worried about whether the product is useful in actual use? Therefore, the customer can flexibly choose to customize a set of test points first and after a period of operation, it is practical. Then a test probe can be installed. How did this happen?
       It is because each set of Linshang non-contact vacuum coating thickness measuring system test points is independent. The test points are controlled by a controller. One controller can control 3 sets of test points. An aviation plug is used between the test points and the controller for connection. In other words, when the user wants to install two test points later, they can directly add two test points to the existing foundation, without the need to install additional controllers or other components.
       This non-contact vacuum coating thickness measuring system is based on the principle that the transmittance (optical density) of the material is proportional to the coating thickness on the material. The material is monitored by monitoring the optical transmittance (optical density) of the material. LS152 non-contact vacuum coating thickness measuring system adopts RS485 communication interface and supports standard MODBUS communication protocol. It can realize closed-loop control with vacuum coating machine, which is especially helpful for controlling production quality and improving production efficiency.
       If you also have vacuum coating thickness inspection requirements, please contact us at sales21@linshangtech.com! For more application examples of Linshang non-contact vacuum coating thickness measuring system, please click the text below for details.